December 3, 2017, 4:49 am
Author:
FerneAli
Posted: Sun Dec 03, 2017 1:49 pm (GMT+1)
I just could not go away your web site prior to suggesting that I really enjoyed the usual information an individual provide to your guests? Is gonna be back frequently to inspect new posts Feel free to surf to my blog ... ECU Blocks
↧
December 4, 2017, 2:58 am
Author:
PeggySay
Posted: Mon Dec 04, 2017 11:58 am (GMT+1)
I merely wanted to thank you again for your amazing site you have developed here. It can be full of useful tips for those who are actually interested in this subject, in particular this very post. You really are all so sweet as well as thoughtful of others and reading your site posts is a wonderful delight with me. And such a generous present! Dan and I will have fun making use of your recommendations in what we have to do in a few days. Our record is a mile long and tips is going to be put to beneficial use. my web page ecu Blocks
↧
↧
December 4, 2017, 5:24 am
Author:
gpowless
Posted: Mon Dec 04, 2017 2:24 pm (GMT+1)
For some reason in the last 1 week some of my AC21 updated pln files (these are legacy projects brought forward in many iterations of ARCHICAD) won't load. AC21 crashes after loading a library that I have warnings about being corrupted but have always .
The odd thing is that all the projects open successfully in AC21RC. I am able to save the projects as AC20, then open & resave as AC21 without any problem.
Anyone experience anything similar? Or have any idea what is happening?
_________________
AMD Phenom II 2800MHz 8g
2 - GeForce GTX 550 Ti +1g
2 - Viewsonic VA2226w
Microsoft Windows 10
Archicad 21 USA Full
Intel i7-6700@3.4GHz 16g
GeForce GTX 745 4g
2-HP Pavilion 25xw
Windows 10
Archicad 21 USA Full
↧
December 5, 2017, 8:20 am
Author:
dkovacs
Posted: Tue Dec 05, 2017 5:20 pm (GMT+1)
Hi,
Unfortunately, I don't know about any. If you find one, I think we would all be happy to hear about it.
What you can check, is if it is fine on PDFs after publishing those layouts (in that case it is just a "display issue" on layouts, but your published papers should be fine). Also, see if manually updating the drawing on the layout helps.
Regards,
_________________
Daniel Alexander Kovacs
Technical Support Engineer
GRAPHISOFT
For Troubleshooting and useful Tips & Tricks visit http://helpcenter.graphisoft.com
↧
December 5, 2017, 3:04 pm
Author:
benjamin_chan
Posted: Wed Dec 06, 2017 12:04 am (GMT+1)
Hi all
I experienced this error on a teamwork file recently, using AC21, with the book setting dialogue box being massive and nothing appearing inside.
It was fixed when I saved the teamwork file out of the server onto my desktop as a PLN, then opening it via AC and ticking the box "Open & Repair selected file".
Then the book setting dialogue box worked again, and I re-shared it back onto the BIM server.
Ben
_________________
ARCHICAD 21. Windows 7 x64
↧
↧
December 6, 2017, 12:25 am
Author:
runxel
Posted: Wed Dec 06, 2017 9:25 am (GMT+1)
Had the same problem with a particular file which was migrated to 20, but is not teamwork.
Trying to close the window will crash Archicad.
_________________
AC 20 | Mac 10.12 | Author of the GDL plugin for Sublime Text
↧
December 6, 2017, 1:11 am
Author:
Lukiiip
Posted: Wed Dec 06, 2017 10:11 am (GMT+1)
Hey,
I have a very annoying problem. My dimensioning is crazy, but only the dimensions from door axis.
I tried to find the issue, first it happens all the time when i published dwg files through the publisher....
Now i have the problem that some layers will activate or deactivate themselves for no reason and i think as a result the dimensions will go anywhere.
Have anyone a solution for this, it is really annoying to set the dimensions 100 times new.
thanks
↧
December 6, 2017, 4:54 am
Author:
luisdias
Posted: Wed Dec 06, 2017 1:55 pm (GMT+1)
This has been a recurrent problem since shadows have become a staple in the OpenGL window, and no one has ever explained to me why this is an issue.
Whenever I open the 3D window it's a bit of rolling the dice. If I open it with a marquee or not, there's a chance that the shadows become completely chaotic. If I change the marquee (or not use it at all), the situation changes and the shadows are presented correctly.
I haven't found a logic to this at all. Sometimes it works well when I use the marquee, sometimes it [i]stops [/i] working well when I use it. Sometimes, it's how you draw the marquee. It cannot be an object, since many times it's only when I use the marquee that the problem occurs (and I'm not cutting objects in half when I do that, for instance).
I'd love to finally get some kind of feedback on this issue.
Note - the attached image shows chaotic shadows, but I just have to change the marquee a tad bit (or show the entire project in 3D) and the shadows are totally fine).
_________________
Luí
s
_________________
Luí
s Dias / Architect
JBMG Arquitectos
AC21 POR •
Intel Core i7 - 7700 @ 3.6GHz | 32 gb ram •
Windows 10 Pro
↧
December 7, 2017, 1:13 am
Author:
dkovacs
Posted: Thu Dec 07, 2017 10:13 am (GMT+1)
Hello everyone,
I am not sure the Fastlogger folder deleting thing is related to this, but we have a problem in ARCHICAD 21 that it will keep reverting drawings to "needs checking" status (even though nothing changed), so when you switch back it refreshes drawings. This should be fixed in the next update of ARCHICAD 21 (5002), which is already available as a preview version.
If someone has a a similar problem, this might be the solution to it!
Regards,
_________________
Daniel Alexander Kovacs
Technical Support Engineer
GRAPHISOFT
For Troubleshooting and useful Tips & Tricks visit http://helpcenter.graphisoft.com
↧
↧
December 7, 2017, 6:27 am
Author:
dkovacs
Posted: Thu Dec 07, 2017 3:27 pm (GMT+1)
alemanda,
It is not a bug, it's a limitation of the Selection Settings Dialog. Displaying the actual values here would require that this dialog would be aware of eg. how long the wall is, but since that value is not available here (only thickness and height), we decided we will be just displaying a kind of preview/placeholder for User Defined IFC values here, not the actual value. It will go out properly to lists and IFC files though.
Regards,
_________________
Daniel Alexander Kovacs
Technical Support Engineer
GRAPHISOFT
For Troubleshooting and useful Tips & Tricks visit http://helpcenter.graphisoft.com
↧
December 7, 2017, 12:01 pm
Author:
halolo
Posted: Thu Dec 07, 2017 9:01 pm (GMT+1)
i can't open an old file with archicad 16 ,
here's the log file , thanks
[meaningless log file deleted by moderator]
↧
December 7, 2017, 4:04 pm
Author:
Karl Ottenstein
Posted: Fri Dec 08, 2017 1:04 am (GMT+1)
What operating system are you running AC 16 on?
When you say 'old file' - what version was the file created with?
_________________
AC 20 US, Artlantis 5, Adobe CS 6, Piranesi 6, Final Cut Pro X, etc.
8 Core 2.8 Mac Pro/12GB RAM, SSD, ATI 5770/1GB, 27" LED Cinema/Dell U2415: OS 10.11.6
↧
December 7, 2017, 11:47 pm
Author:
dkovacs
Posted: Fri Dec 08, 2017 8:47 am (GMT+1)
Hello all,
I looked into it, and it seems like this should be fixed in the next updates of ARCHICAD 20 (70xx) and ARCHICAD 21 (50xx) to some extent. They both should be released this month.
In this update we tried to fix some reasons that can make the layout books faulty, but there might still be some issues left. If after installing the updates you still run into the problem, please let us know, so we can look into what might have gone wrong.
An open & repair should indeed fix the problem anyhow (this is a fix for the already faulty state that we included in the current updates).
Thanks,
_________________
Daniel Alexander Kovacs
Technical Support Engineer
GRAPHISOFT
For Troubleshooting and useful Tips & Tricks visit http://helpcenter.graphisoft.com
↧
↧
December 8, 2017, 2:00 pm
Author:
MMontgomery
Posted: Fri Dec 08, 2017 11:00 pm (GMT+1)
| Dragan Weber wrote: |
Check your Mouse Polling Rate. Anything over 125 Hz slows 2D performance "immensely" down. How to check ? Depends on the mouse used.
|
This fixed my issue. I've been trying to solve this for years and this was the problem. I scaled my polling rate from 1000 to 125 and it works as I would expect now.
Thanks!
_________________
AC 6-21 v4022
Intel i7 3.4GHz - GTX980ti - Windows 10 - 32GB RAM
↧
December 10, 2017, 10:22 am
Author:
Steve Jepson
Posted: Sun Dec 10, 2017 7:22 pm (GMT+1)
Old topic - but we might be able to use these hangers again now because of the Revit RFA Import tool ? The ones shown in the picture are Cadimage
https://www2.strongtie.com/drawings/revit.asp
![]()
Lots of good Simpson stuff in .skp here too -- https://3dwarehouse.sketchup.com/user.html?id=0724210250130978363401773&nav=models
Why is it that there is no .gsm library for this stuff too ? Why does the whole world seem to think that the only thing BIM is Revit?
TIP: If a person is not modeling with 3D hangers, you might still want to use have one of these 3D hangers for use in your hanger schedules.
_________________
ArchiCAD 21 4022-1.2/21.0.4538.6 USA
Windows 10 Pro 64x
Dell 7720 64 GB 2400MHz ECC
Xeon E3-1535M v6, 4.20GHz
(2) 1TB M.2 PCIe Class 50 SSD's
17.3" UHD IPS (3840x2160)
Nvidia Quadro P5000 16GB GDDR5
↧
December 12, 2017, 3:12 am
Author:
DebbraCa
Posted: Tue Dec 12, 2017 12:12 pm (GMT+1)
Further, some cleaning solutions can harm your item, so if what you need to clean fridge meme (Check This Out) or launder is definitely sentimental or expensive call a professional.
↧
December 12, 2017, 12:14 pm
Author:
Dennis Lee
Posted: Tue Dec 12, 2017 9:14 pm (GMT+1)
I finally couldn't stand the lag in working with ArchiCAD, and started to test out what made it so slow. Most of the issue is the slow response in selecting, de-selecting (ESC key), which forces me to pause and wait for the selection / de-selection to finish prior to issuing the other commands.
I found that when I turn off the INFO BOX, everything is so much faster and instant. Every time I select a different element made from a different tool, the info box struggles to refresh, changing into the info box setting specific for that selection. I'd like to just turn it off, but as you know, the INFO BOX is so critical I'm not sure that's a viable solution.
One easy way to experiment, select a bunch of different objects, wait for it to get selected (turns blue), then hit the escape key once. Try this with the info box on and info box off.
I would like to know, is this behavior only for me? Do other users out there experience this slowness?
_________________
ArchiCAD 21 USA
Intel Core i7-4790 32GB Windows 10 x64
Nvidia GeForce GTX 750 Ti
Since ArchiCAD 9
↧
↧
December 12, 2017, 5:06 pm
Author:
Barry Kelly
Posted: Wed Dec 13, 2017 2:06 am (GMT+1)
| Dennis Lee wrote: |
One easy way to experiment, select a bunch of different objects, wait for it to get selected (turns blue), then hit the escape key once. Try this with the info box on and info box off.
I would like to know, is this behavior only for me? Do other users out there experience this slowness? |
It might just be you.
I have instant selection and deselection no matter how many elements I try with.
No waiting at all.
Things I would try.
Make sure you have the latest Archicad update - 5010 has just been released.
Make sure you have the latest video card drivers.
Try using the 'Standard' Work Environment.
Close the 'Renovation' palette if it is open to see if that makes any difference.
Turn of any trace reference if you have one active.
Barry.
_________________
Versions 6.5 to 21
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 7 64bit
↧
December 12, 2017, 10:45 pm
Author:
Dennis Lee
Posted: Wed Dec 13, 2017 7:45 am (GMT+1)
Thank you Barry for your feedback. I did a complete uninstall of everything ArchiCAD and reinstalled everything again, seems to be working normal now. Maybe I had too much leftover bits from past versions, etc.
Regards,
Dennis.
_________________
ArchiCAD 21 USA
Intel Core i7-4790 32GB Windows 10 x64
Nvidia GeForce GTX 750 Ti
Since ArchiCAD 9
↧
December 12, 2017, 10:56 pm
Author:
Barry Kelly
Posted: Wed Dec 13, 2017 7:56 am (GMT+1)
Many different Archicads should not have been the problem.
I have 14 different versions/builds/national versions installed with no apparent issues.
Just reinstalling or updating that version should have fixed the problem I think.
But I am glad you have it working though.
Barry.
_________________
Versions 6.5 to 21
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 7 64bit
↧
