↧
Archicad Navigator Greek Fonts
↧
Dimension text direction in Layout
Author:Andrija Bojovic
Posted: Fri Aug 12, 2016 10:18 am (GMT+1)
Dear,
During the drawing of a big project I got to the strange problem. When I put a part of a project (as a drawing) in a layout and rotate it for a 90° , dimension text remains just it was at the drawing, and it is hard readable on a paper sheet (you need to rotate paper for 180° to be able to read it). Usually, with the small buildings, I was making an easy solution with rotation of whole building for a 90° before putting it on a layout... now it would be not a good solution, because all other dimension texts in whole project will not stay in right positions. Is there any option to fix that problem just for that layout?
Thanks![Shocked]()
![Smile]()
P.S. I am using Archicad 19
Posted: Fri Aug 12, 2016 10:18 am (GMT+1)
Dear,
During the drawing of a big project I got to the strange problem. When I put a part of a project (as a drawing) in a layout and rotate it for a 90° , dimension text remains just it was at the drawing, and it is hard readable on a paper sheet (you need to rotate paper for 180° to be able to read it). Usually, with the small buildings, I was making an easy solution with rotation of whole building for a 90° before putting it on a layout... now it would be not a good solution, because all other dimension texts in whole project will not stay in right positions. Is there any option to fix that problem just for that layout?
Thanks
P.S. I am using Archicad 19
↧
↧
Not able to open "PhotoRendering Settings" window
Author:Andrija Bojovic
Posted: Fri Aug 12, 2016 10:43 am (GMT+1)
Dear,
After days and days of searching for a solution and reading forums, google-ing and trying to find out what is wrong, I decided to ask you.
I can not open "PhotoRendering Settings" window! I am using Archicad 19.
Yes, I tried with ctrl+F10, than through a menu/rendering/..., than through a rendering toolbar... but every time when I click on that icon or press ctrl+F10, just nothing happen.
I changed a screen resolution, minimized and maximized archicad window, updated a graphic card driver, moved/closed all toolbars and than moved it back, tried with opening a new project with a default working environment, and always the same-nothing. In archicad 18 it works normally.
Please help![Shocked]()
![Rolling Eyes]()
![Idea]()
I am using:
Archicad 19
CineRender by MAXON
Windows 7 Proffesional 64bit
Intel i7-4770 @3.4GHz
16Gb RAM
NVIDIA Quadro 4000 graphic
Posted: Fri Aug 12, 2016 10:43 am (GMT+1)
Dear,
After days and days of searching for a solution and reading forums, google-ing and trying to find out what is wrong, I decided to ask you.
I can not open "PhotoRendering Settings" window! I am using Archicad 19.
Yes, I tried with ctrl+F10, than through a menu/rendering/..., than through a rendering toolbar... but every time when I click on that icon or press ctrl+F10, just nothing happen.
I changed a screen resolution, minimized and maximized archicad window, updated a graphic card driver, moved/closed all toolbars and than moved it back, tried with opening a new project with a default working environment, and always the same-nothing. In archicad 18 it works normally.
Please help
I am using:
Archicad 19
CineRender by MAXON
Windows 7 Proffesional 64bit
Intel i7-4770 @3.4GHz
16Gb RAM
NVIDIA Quadro 4000 graphic
↧
Not able to open "PhotoRendering Settings" window
Author:Anton Kazmin
Posted: Fri Aug 12, 2016 12:06 pm (GMT+1)
You pushed "PhotoRendering Settings" palette off screen and it does not reset back, even if you use another Work Environment profile.
This is a bug and we need Graphisoft input on this.
Other palettes return to their location saved under Work Environment > Workspace Schemes in specific Work Environment profile, but "PhotoRendering Settings" palette does not. It does not even return if "New & Reset All" option is used.
If pushed off-screen "PhotoRendering Settings" palette is gone forever.
How do we get it back, Graphisoft?
_________________
Anton Kazmin
Pushing BIM since 1994
Watching ARCHICAD grow since 1987
Raising the bar for Graphisoft Hall of Fame since v.16
Consulting | Training | BIM audit | Energy modeling
Posted: Fri Aug 12, 2016 12:06 pm (GMT+1)
You pushed "PhotoRendering Settings" palette off screen and it does not reset back, even if you use another Work Environment profile.
This is a bug and we need Graphisoft input on this.
Other palettes return to their location saved under Work Environment > Workspace Schemes in specific Work Environment profile, but "PhotoRendering Settings" palette does not. It does not even return if "New & Reset All" option is used.
If pushed off-screen "PhotoRendering Settings" palette is gone forever.
How do we get it back, Graphisoft?
_________________
Anton Kazmin
Pushing BIM since 1994
Watching ARCHICAD grow since 1987
Raising the bar for Graphisoft Hall of Fame since v.16
Consulting | Training | BIM audit | Energy modeling
↧
Dimension text direction in Layout
Author:ejrolon
Posted: Fri Aug 12, 2016 1:41 pm (GMT+1)
If I understand correctly.
The correct way to do this is to save the view with the rotation first and then place it in the layout. Use the "Set Orientation" command and when you select the view check also that under Zooming you have "Zoomed Area" selected as part of the settings.
_________________
eduardo roló n AIA
MBPr 2.6 i7 16GB ram, MacPro dual quad 2.8 18GB ram
OS X 10.10 latest
AC19US -> AC08
Posted: Fri Aug 12, 2016 1:41 pm (GMT+1)
If I understand correctly.
The correct way to do this is to save the view with the rotation first and then place it in the layout. Use the "Set Orientation" command and when you select the view check also that under Zooming you have "Zoomed Area" selected as part of the settings.
_________________
eduardo roló n AIA
MBPr 2.6 i7 16GB ram, MacPro dual quad 2.8 18GB ram
OS X 10.10 latest
AC19US -> AC08
↧
↧
ESC key not working...
Author:rgarand
Posted: Fri Aug 12, 2016 5:43 pm (GMT+1)
Is anyone else having a problem with the ESC key not working as intended? I have ALWAYS used my ESC key to get out of a command & deselect an object.
Lately if I have an object selected and I have NOT started a command, it will deselect as expected, BUT if I am in a command and try to cancel out of it/deselect the object, nothing happens.
Just wondering if it's just me...
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
Posted: Fri Aug 12, 2016 5:43 pm (GMT+1)
Is anyone else having a problem with the ESC key not working as intended? I have ALWAYS used my ESC key to get out of a command & deselect an object.
Lately if I have an object selected and I have NOT started a command, it will deselect as expected, BUT if I am in a command and try to cancel out of it/deselect the object, nothing happens.
Just wondering if it's just me...
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
↧
Not able to open "PhotoRendering Settings" window
Author:rgarand
Posted: Fri Aug 12, 2016 6:11 pm (GMT+1)
Try this:
Make sure ArchiCAD is the program "on top"/"active" by clicking within an Archicad window you can see on your monitor. Then use the Windows Key + (the left or right arrow key) until you see the lost window show up on your screen.
FYI
You may have to keep the WIN key down and click the left or right arrow key a few times to get the window to show up.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
Posted: Fri Aug 12, 2016 6:11 pm (GMT+1)
Try this:
Make sure ArchiCAD is the program "on top"/"active" by clicking within an Archicad window you can see on your monitor. Then use the Windows Key + (the left or right arrow key) until you see the lost window show up on your screen.
FYI
You may have to keep the WIN key down and click the left or right arrow key a few times to get the window to show up.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
↧
My .pln wont load past "Refreshing the screen" phase
Author:matcar
Posted: Sat Aug 13, 2016 2:59 am (GMT+1)
Hey everyone,
Has anyone had any problems loading up .pln files in ArchiCAD 19 & 20 lately (as in it just started happening yesterday)? None of my .pln file will load past the "Refreshing the screen" phase and I have no idea why?
Oh and on a different laptop it works fine so im sure its not the file...
Things I have tried:
-Reinstalling both 19 and 20 (twice)
-Installing to portable HDD and running from there. (I did this to see if it was the install, but when I run it of the HDD on another computer it opens fine.
I feel like it may be a setting with my laptop but I need to get this fixed because I have a major assessment due and I have not got regular access to an alternative laptop![Sad]()
_________________
Cheers everyone![Smile]()
Posted: Sat Aug 13, 2016 2:59 am (GMT+1)
Hey everyone,
Has anyone had any problems loading up .pln files in ArchiCAD 19 & 20 lately (as in it just started happening yesterday)? None of my .pln file will load past the "Refreshing the screen" phase and I have no idea why?
Oh and on a different laptop it works fine so im sure its not the file...
Things I have tried:
-Reinstalling both 19 and 20 (twice)
-Installing to portable HDD and running from there. (I did this to see if it was the install, but when I run it of the HDD on another computer it opens fine.
I feel like it may be a setting with my laptop but I need to get this fixed because I have a major assessment due and I have not got regular access to an alternative laptop
_________________
Cheers everyone
↧
ArchiCad18 Cinerender crash and huge disc space lost
Author:mikas
Posted: Sat Aug 13, 2016 4:19 pm (GMT+1)
I PM'd the crash ID and sent my file through the upload portal.
I haven't been able to reproduce the problem. Though I haven't tried that so much either.
I was experimenting and playing with curtain wall custom panels and upped settings a little bit for the rendering engine. Too much, obviously, and I quess my modest amount of RAM just ran out (32GB).
_________________
OSX+AC19
Posted: Sat Aug 13, 2016 4:19 pm (GMT+1)
I PM'd the crash ID and sent my file through the upload portal.
I haven't been able to reproduce the problem. Though I haven't tried that so much either.
I was experimenting and playing with curtain wall custom panels and upped settings a little bit for the rendering engine. Too much, obviously, and I quess my modest amount of RAM just ran out (32GB).
_________________
OSX+AC19
↧
↧
ESC key not working...
Author:shtarkel
Posted: Sun Aug 14, 2016 3:35 pm (GMT+1)
It's a bug
_________________
ARCHICAD 20, Windows 10 x64
on a six-core i-7 3930K,
16 GB RAM,
SSD and quadro 600.
LCD Dell u3011 2560x1600 pixels.
Posted: Sun Aug 14, 2016 3:35 pm (GMT+1)
It's a bug
_________________
ARCHICAD 20, Windows 10 x64
on a six-core i-7 3930K,
16 GB RAM,
SSD and quadro 600.
LCD Dell u3011 2560x1600 pixels.
↧
ArchiCAD 20, slow to load, sluggish in 3d
Author:bgoodale
Posted: Thu Aug 11, 2016 9:32 pm (GMT+1)
Im finding archicad 20 very slow to load even small files, and the performance in 3d open gl is sluggish to the point of being nearly unusable in 3d. and i have a pretty good machine:
HP Zbook 17
32 gb ram
intel Core i7 @2.8ghz
_________________
AC 19 Build 4011
WINDOWS 7 Service Pack
HP Z Book
Intel Core i7 -4700MQ @ 2.40 Ghz
32 GB RAM
64 Bit Operating System
NVIDIA Quadro K3100M
Posted: Thu Aug 11, 2016 9:32 pm (GMT+1)
Im finding archicad 20 very slow to load even small files, and the performance in 3d open gl is sluggish to the point of being nearly unusable in 3d. and i have a pretty good machine:
HP Zbook 17
32 gb ram
intel Core i7 @2.8ghz
_________________
AC 19 Build 4011
WINDOWS 7 Service Pack
HP Z Book
Intel Core i7 -4700MQ @ 2.40 Ghz
32 GB RAM
64 Bit Operating System
NVIDIA Quadro K3100M
↧
ArchiCAD 20, slow to load, sluggish in 3d
Author:sboydturner
Posted: Fri Aug 12, 2016 8:23 am (GMT+1)
I too have a z-book (refer signature) but am finding AC20 as fast as AC19, could be file related
Scott
_________________
Scott Boyd-Turner
HP Z230 Workstation: i7-4790, 16Gb, 256Gb SSD, Quarto K2204Gb, Win 7 Pro
15" Macbook Pro 11.3, 16Gb, 512Gb SSD, Geforce GT750M, MacOS 10.11.3
HP ZBook Studio 15: i7-6820 ,16Gb, 256Gb SSD, Quadro M1000, Win10 Pro
AC 19 5002 AUS
Posted: Fri Aug 12, 2016 8:23 am (GMT+1)
I too have a z-book (refer signature) but am finding AC20 as fast as AC19, could be file related
Scott
_________________
Scott Boyd-Turner
HP Z230 Workstation: i7-4790, 16Gb, 256Gb SSD, Quarto K2204Gb, Win 7 Pro
15" Macbook Pro 11.3, 16Gb, 512Gb SSD, Geforce GT750M, MacOS 10.11.3
HP ZBook Studio 15: i7-6820 ,16Gb, 256Gb SSD, Quadro M1000, Win10 Pro
AC 19 5002 AUS
↧
ArchiCAD 20, slow to load, sluggish in 3d
Author:bgoodale
Posted: Fri Aug 12, 2016 4:29 pm (GMT+1)
it seems to be be independent of the file or file size...
_________________
AC 19 Build 4011
WINDOWS 7 Service Pack
HP Z Book
Intel Core i7 -4700MQ @ 2.40 Ghz
32 GB RAM
64 Bit Operating System
NVIDIA Quadro K3100M
Posted: Fri Aug 12, 2016 4:29 pm (GMT+1)
it seems to be be independent of the file or file size...
_________________
AC 19 Build 4011
WINDOWS 7 Service Pack
HP Z Book
Intel Core i7 -4700MQ @ 2.40 Ghz
32 GB RAM
64 Bit Operating System
NVIDIA Quadro K3100M
↧
↧
ArchiCAD 20, slow to load, sluggish in 3d
Author:rgarand
Posted: Fri Aug 12, 2016 6:21 pm (GMT+1)
Check your Build number. Your signature says 4011. I am quite sure there is an update. We were having a similar problem with one of the updates in ArchiCAD 19.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
Posted: Fri Aug 12, 2016 6:21 pm (GMT+1)
Check your Build number. Your signature says 4011. I am quite sure there is an update. We were having a similar problem with one of the updates in ArchiCAD 19.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
↧
Pop-up toolbars run away
Author:Esdras Santos
Posted: Sun Aug 14, 2016 7:22 pm (GMT+1)
Bull's Eye!
Thank you very much!
The Pet Palette is now under control and my stress is gone...
_________________
Esdras Santos | architect
www.arkitetural.com.br
AC 16 64 bits BR - PC Core i7 2.60GHz 8GB - win10
Posted: Sun Aug 14, 2016 7:22 pm (GMT+1)
Bull's Eye!
Thank you very much!
The Pet Palette is now under control and my stress is gone...
| David Maudlin wrote: |
| Esdras: I think what you are referring to is the Pet Palette. Its behavior can be modified under Work Environment > User Preference Schemes > Dialog Boxes and Palettes > Pet Palette movement. You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum. David |
_________________
Esdras Santos | architect
www.arkitetural.com.br
AC 16 64 bits BR - PC Core i7 2.60GHz 8GB - win10
↧
My .pln wont load past "Refreshing the screen" phase
Author:Barry Kelly
Posted: Mon Aug 15, 2016 3:14 am (GMT+1)
You say you have re-installed Archicad - I assume you have also installed the latest updates (hotfixes) as well?
I would also check you have the latest video card drivers installed too.
Does the same happen when you do a "New and Reset All' or open the blank template?
Barry.
_________________
Versions 6.5 to 18 (build 3006)
Dell Precision T3600 - Xeon ES-1620 0 at 3.6Ghz, 16GB ram, ATI FirePro W7000 (4GB), Windows 7 (64 bit)
Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit
Posted: Mon Aug 15, 2016 3:14 am (GMT+1)
You say you have re-installed Archicad - I assume you have also installed the latest updates (hotfixes) as well?
I would also check you have the latest video card drivers installed too.
Does the same happen when you do a "New and Reset All' or open the blank template?
Barry.
_________________
Versions 6.5 to 18 (build 3006)
Dell Precision T3600 - Xeon ES-1620 0 at 3.6Ghz, 16GB ram, ATI FirePro W7000 (4GB), Windows 7 (64 bit)
Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit
↧
Pop-up toolbars run away
Author:David Maudlin
Posted: Mon Aug 15, 2016 12:53 pm (GMT+1)
Esdras:
Glad to read that solved the issue, thanks for posting back and adding your signature.
David
_________________
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC20 USA+MEP • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.5GHz | 16 gb ram • OSX10.10.5
Posted: Mon Aug 15, 2016 12:53 pm (GMT+1)
Esdras:
Glad to read that solved the issue, thanks for posting back and adding your signature.
David
_________________
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC20 USA+MEP • iMac 27" 4.0GHz Quad-core i7 | 24 gb ram • MacBook Pro 2.5GHz | 16 gb ram • OSX10.10.5
↧
↧
ESC key not working...
Author:rgarand
Posted: Mon Aug 15, 2016 4:03 pm (GMT+1)
Lovely. I hope this is fixed before I get used to the work around.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
Posted: Mon Aug 15, 2016 4:03 pm (GMT+1)
Lovely. I hope this is fixed before I get used to the work around.
_________________
Robert J. Garand
Dale Gardon Design
ArchiCAD USA 20-Build 3012 USA FULL
Windows 7 Prof (64 bit)
Intel i7-5820K CPU 3.30 GHz (32 GB RAM)
NVIDIA Quadro K4200 (4GB RAM)
↧
archicad file converter problems in windows 7
Author:Cary Dunn
Posted: Mon Aug 15, 2016 6:40 pm (GMT+1)
I was in process of migrating old archicad projects. My OS is Windows 7pro 64bit. All was working well and I could use the Archicad 7,9 & 10 converters successfully. As all was working I refrained from the free Windows 10 upgrade. Since a windows "critical Update" on 16.08.06 I can no longer save a converted file from the 7, 9, & 10 converters. When saving the program crashes/hangs. Windows decided with this critical update to eliminate 4 years of prior system restore points so I can only go back to the 6th which I did but to no effect. Am I screwed? Any ideas? Is this something Archicad will correct with an update? Thanks
_________________
ArchiCAD 19
windows 7pro
intel i7 920
ati radeon HD 5870 1GB
dual monitors
Posted: Mon Aug 15, 2016 6:40 pm (GMT+1)
I was in process of migrating old archicad projects. My OS is Windows 7pro 64bit. All was working well and I could use the Archicad 7,9 & 10 converters successfully. As all was working I refrained from the free Windows 10 upgrade. Since a windows "critical Update" on 16.08.06 I can no longer save a converted file from the 7, 9, & 10 converters. When saving the program crashes/hangs. Windows decided with this critical update to eliminate 4 years of prior system restore points so I can only go back to the 6th which I did but to no effect. Am I screwed? Any ideas? Is this something Archicad will correct with an update? Thanks
_________________
ArchiCAD 19
windows 7pro
intel i7 920
ati radeon HD 5870 1GB
dual monitors
↧
Archicad big project slows down, eventually crashes
Author:Maxitaxi
Posted: Mon Aug 15, 2016 9:46 pm (GMT+1)
Hello, fellow archicad enthusiasts.
At the moment I am working on a big project that consists out of a building with 8 floors, different outer walls.
The problem lies within the heavy workload during shifting elements or adjusting walls, it slows down after adding more walls or picking up elements. From time to time the program even crashes. what is the best way to solve or bypass the enormous workload?
I will add my laptop specs and building aswell.
Building: https://www.dropbox.com/s/fsuf2i0iuz3rkfi/bataviahaven%20v2.5%20-%20DD1%20%20-%20MJ%20%26%20GM.pln?dl=0
Thanks in advanced and I'm sorry about my english, its my second language.
Posted: Mon Aug 15, 2016 9:46 pm (GMT+1)
Hello, fellow archicad enthusiasts.
At the moment I am working on a big project that consists out of a building with 8 floors, different outer walls.
The problem lies within the heavy workload during shifting elements or adjusting walls, it slows down after adding more walls or picking up elements. From time to time the program even crashes. what is the best way to solve or bypass the enormous workload?
I will add my laptop specs and building aswell.
Building: https://www.dropbox.com/s/fsuf2i0iuz3rkfi/bataviahaven%20v2.5%20-%20DD1%20%20-%20MJ%20%26%20GM.pln?dl=0
Thanks in advanced and I'm sorry about my english, its my second language.
↧