January 22, 2018, 5:08 am
Author:
dkovacs
Posted: Mon Jan 22, 2018 2:08 pm (GMT+1)
Hi,
This is a known issue with Search & Replace at the moment in ARCHICAD 21. Unfortunately there's no workaround, but we plan to release the fix for it in an upcoming update!
Regards,
_________________
Daniel Alexander Kovacs
Technical Support Engineer
GRAPHISOFT
For Troubleshooting and useful Tips & Tricks visit http://helpcenter.graphisoft.com
↧
January 22, 2018, 7:41 am
↧
↧
January 23, 2018, 8:27 am
Author:
adearch
Posted: Tue Jan 23, 2018 5:27 pm (GMT+1)
hello,
I had already seen that thread and the linked video, but unfortunately I can not solve the problem because I have a mac ... but above all I don't have cinema 4d (the complete software, i just have the archicad add-on).
I contacted my reseller, but they advised me to format the computer and I would like to avoid it ...
_________________
MacBook Pro 2016, 2.9GHz Dual-core Intel Core i5, 16GB 2133MHz LPDDR3 SDRAM, Intel Iris Graphics 550, 512GB PCIe-based SSD.
OS High Sierra - Archicad 21
↧
January 23, 2018, 3:01 pm
Author:
Brett Brown
Posted: Wed Jan 24, 2018 12:01 am (GMT+1)
After getting the Eula every time on start up I started getting the attached as well. Now the Eula has stopped for no reason and just getting the attached everytime. Anybody seen this before and any clue to get rid of it? thanks
_________________
Imac, Sierra AC 20
↧
January 23, 2018, 3:08 pm
Author:
Brad Elliott
Posted: Wed Jan 24, 2018 12:08 am (GMT+1)
That's because your firewall is now turned on. You are supposed to be able to add Archicad to the allowed list but I have never gotten it to work. I think it is best to keep the firewall turned on and put up with the pop up.
By the way, I am no longer having the problem in AC 21
_________________
Mac OS10.11.6 AC21 USA Full
Hackintosh 4 GHz i7 32gb ram NVidia1060
↧
↧
January 23, 2018, 3:14 pm
Author:
Brett Brown
Posted: Wed Jan 24, 2018 12:14 am (GMT+1)
Yes exactly, all I got from Support was to turn off the firewall, and as you said, Archicad is in the allowed list but doesn't work. Where's Graphisoft on this problem? Hope the lastest update to AC 20 when it is approved for NZ will fix it.
_________________
Imac, Sierra AC 20
↧
January 23, 2018, 3:05 am
Author:
Algirdas Rybelis
Posted: Tue Jan 23, 2018 12:05 pm (GMT+1)
Same problem here.
_________________
iMac (Retina 5K, 27-inch, 2017)
macOS High Sierra, 10.13.2
ARCHICAD 21 5010 INT FULL
4,2 GHz Intel Core i7
64 GB 2400 MHz DDR4
Radeon Pro 580 8 GB
500 GB Flash Storage
↧
January 24, 2018, 4:29 pm
Author:
russfairhurst
Posted: Thu Jan 25, 2018 1:29 am (GMT+1)
Is there a bug in Archicad 18 9019?
When we use resize to change the size of an object it does not update until we open the object setting.
Example screenshots with notes attached. This is happening with all objects.
Is this a known bug?
_________________
Russell Fairhurst
Burleigh Design
ArchiCAD AU 18-Build 9019
ArchiCAD AU 13-Build 3835
Windows 7 Prof (64 bit)
Intel i7 3.50GHz (16 GB RAM)
NVIDIA Quadro K2000D (2GB)
↧
January 24, 2018, 5:34 pm
Author:
Barry Kelly
Posted: Thu Jan 25, 2018 2:34 am (GMT+1)
It seems it depends on the objects - maybe how they are scripted - I don't know for sure.
If I try is with the Graphisoft shower cabin or shower tray I see the problem you have.
If I try with other shower objects I have they stretch just fine.
However I wouldn't do it this way.
Just grab one of the corner nodes and stretch it to where you want.
If you have the 'Tracker' active then you can also type in the dimensions you want.
Or type the length and depth into the info box - it will change size based on the location of the anchor point if you do this so it is actually easier to just stretch the node you want.
Generally any node that is situated on the extents of the object (i.e. length or depth) will adjust those values - both if it is on a corner.
Barry.
_________________
Versions 6.5 to 21
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 7 64bit
↧
↧
January 24, 2018, 5:55 pm
Author:
russfairhurst
Posted: Thu Jan 25, 2018 2:55 am (GMT+1)
| Barry Kelly wrote: |
However I wouldn't do it this way.
Just grab one of the corner nodes and stretch it to where you want.
If you have the 'Tracker' active then you can also type in the dimensions you want.
Barry. |
Thats fine for one object but one my typical usage is for resizing landscaping objects. eg 15 plants scaled to fit a planting border.
_________________
Russell Fairhurst
Burleigh Design
ArchiCAD AU 18-Build 9019
ArchiCAD AU 13-Build 3835
Windows 7 Prof (64 bit)
Intel i7 3.50GHz (16 GB RAM)
NVIDIA Quadro K2000D (2GB)
↧
January 24, 2018, 6:27 pm
Author:
Barry Kelly
Posted: Thu Jan 25, 2018 3:27 am (GMT+1)
The problem has been fixed in newer versions of Archicad.
I just tried 19 & 21 and it is fine there.
Rebuild & Regenerate (CTRL+ALT+SHIFT+R) will also force the resize without having to open the object settings.
Barry.
_________________
Versions 6.5 to 21
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 7 64bit
↧
January 24, 2018, 6:48 pm
Author:
russfairhurst
Posted: Thu Jan 25, 2018 3:48 am (GMT+1)
The Rebuild & Regenerate works most of the time. I just tried resizing up and Rebuild & Regenerate worked but if I resize down past the original object size Rebuild & Regenerate does not work.
We have stopped updating at 18 after a jump from 13 and that was not a good transition after discovering a bug that would erroneously bring RL and north data from one AC file to another.
_________________
Russell Fairhurst
Burleigh Design
ArchiCAD AU 18-Build 9019
ArchiCAD AU 13-Build 3835
Windows 7 Prof (64 bit)
Intel i7 3.50GHz (16 GB RAM)
NVIDIA Quadro K2000D (2GB)
↧
January 25, 2018, 3:46 am
Author:
bonevs
Posted: Thu Jan 25, 2018 12:46 pm (GMT+1)
This is kind of annoying and stupid problem. We recently bought this configuration:
Processor: AMD Ryzen 5 1600 3.2 GhZ
RAM: 16 GB DDR4
Video card: GeForce GTX 1070 8GB DDR5
HDD: ADATA SX9000NP
This is an almost 2000 euro computer and it still run like something veeery old. All the recommandations you wrote in the previous replies are tested and theyre was no result at all...my older configuration (6 years older) is doing beetter performence in 2D. There is something wrong and I don't know what. They must be some solution...i'm currently using Archicad 21 with latest updates. Does somebody find an answer for this problem?
↧
↧
January 27, 2018, 3:15 pm
Author:
rm
Posted: Sun Jan 28, 2018 12:16 am (GMT+1)
Hi everyone -
I have been away from this forum for years. I just upgraded to AC21 on Mac OSX. I am setting up my shortcuts and I have noticed AC21 will not respond to the shortcut "OPTION COMMAND D". It will not allow me to drag a copy by using the keystrokes. However, if I "right-click" over a line or object, I then can drag a copy.
I have looked in my user preferences and I noticed this IS the keystroke for drag a copy from Graphisoft out of the box. I have even tried to assign the keystroke manually and AC will not let me do it.
Interestingly "OPTION COMMAND E", rotate a copy, "OPTION COMMAND M", mirror a copy both work as intended.
Anyone else on a Mac experiencing this problem? Is this a known bug?
Thanks in advance for any insight/help offered.
- Robert Mariani
_________________
Architecture / Architectural Photography
www.robertmariani.com
Mac OSX 10.12
AC 21
↧
January 27, 2018, 3:51 pm
Author:
Karl Ottenstein
Posted: Sun Jan 28, 2018 12:51 am (GMT+1)
Hi Robert,
Welcome back - long time!
System keyboard shortcuts take preference. You may have noticed your dock appearing and disappearing while pressing opt-cmd-D?
Go to System Preferences > Keyboard and uncheck the box for the system shortcut. It will now respond as desired within ARCHICAD.
Cheers,
Karl
_________________
AC 21 US, Adobe CS 6, Piranesi 6, Final Cut Pro X, etc.
8 Core 2.8 Mac Pro/12GB RAM, SSD, ATI 5770/1GB, 27" LED Cinema/Dell U2415: OS 10.11.6
↧
January 27, 2018, 4:00 pm
Author:
rm
Posted: Sun Jan 28, 2018 1:00 am (GMT+1)
Karl -
As usual your reply is spot-on and solved the problem!!! Thank you for taking time to respond so quickly.
Your generosity with your knowledge of AC is always appreciated.
- Robert Mariani
_________________
Architecture / Architectural Photography
www.robertmariani.com
Mac OSX 10.12
AC 21
↧
January 27, 2018, 4:35 am
Author:
KeesW
Posted: Sat Jan 27, 2018 1:35 pm (GMT+1)
I am using AC21 on a small project and find some of its operations much slower that I am used to in previous versions. When I select la working on a model, the scrolled list takes measurable time to appear. When I scroll this list up or down, it takes measurable seconds to actually scroll and it stops and starts. The response to menu selections is also sometimes tardy. I've never had this with previous AC versions.
Am I alone in finding this?
_________________
Cornelis (Kees) Wegman
cornelis wegman architects
Desktop: Archicad 16, 17, 18, 19, 20 Win10 64, Core i7 , 12 GB RAM, NVidia GTX560 Ti, 2x1.5TB HD Array
Laptop: Archicad 16, 17, 18, 19, 20 Win10 64 Core i7, 8GB RAM, 2GB NVidia GT 540M
↧
↧
January 27, 2018, 8:06 am
Author:
alemanda
Posted: Sat Jan 27, 2018 5:06 pm (GMT+1)
No, you're not alone
I'm working on 150mb file project. Not big.
When I pass from a view to another view it takes up to a couple of seconds (and more in many cases) to redraw the plan ... I'm a bit disappointed. I bought a new machine in June with many cores in order to exploit the multi tasking but what I see a normale "behaviour", just a couple of cores working except for rendering where it runs all the cores ...
In order to speed up the things I had to disable the background update.
I found AC21 much slower than AC19 (never tried AC20).
Hope next versions will be faster and will be really multi tasking.
_________________
AC 19 and AC21 latest hotfix
Win 10 Pro 64bit
Double XEON 14 CORES (tot 28 physical cores)
32GB RAM - SSD 256GB - Nvidia Quadro K620
Display DELL 25'' 2560x1440
www.almadw.it
↧
January 28, 2018, 6:42 pm
Author:
Barry Kelly
Posted: Mon Jan 29, 2018 3:42 am (GMT+1)
One of my minions had a machine that was running slow the other day.
He had palettes undocked and dragged onto a second monitor.
Docking all the palettes and closing those not needed and restarting the machine made a big improvement.
Barry.
_________________
Versions 6.5 to 21
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Dell Precision 3510 - i7 6820HQ @ 2.70GHz, 16GB RAM, AMD FirePro W5130M, Windows 7 64bit
↧
January 29, 2018, 1:23 am
Author:
vikram pawar
Posted: Mon Jan 29, 2018 10:23 am (GMT+1)
We have been working on a project which includes high level of detailling
in which to create old gothic details.. anywhere when we use the morph tool or complex profile..
the curve resolution is not smooth..
with more segmentation
kindly help me with a possible solution how to make gothic arches using morph with smooth curves and not segmentated
_________________
Studio "Architecture"
23/366, Azad Nagar 1, J.P road,
Andheri (W),
Mumbai- 400053.
studioarchitecture@yahoo.co.in
↧